Power 46 Brushless Outrunner Motor, 670Kv

$89.99* List: $118.99 (EFLM4046A) *Available at participating retailers

Due Late September, 2014

Find a Retailer
or

Ideal for 40- to 46-size airplanes weighing 4 to 7 pounds (1.8–3.2 kg), 25- to 40-size 3D airplanes up to 5 pounds (2.2 kg), or models requiring up to 925 watts of power.

Completion Guides

Manuals

Detailed Information

Hardware is included with the purchase of this motor.
Examples of Airplane Setups:

NOTE: All data measured at full throttle. Actual performance may vary depending on battery and flight conditions.

Hangar 9 Ultra Stick 40 ARF (HAN1675 / HAN1690)

Option 1:
Motor: Power 46
ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft Li-Po cutoff and no brake)
Prop: APC 13x8E
Battery: Thunder Power PRO LITE 6000mAh 4S3P (THP60004S3PPL)
Flying Weight w/Battery: 5.8 lb

Amps Volts Watts Input Watts/Pound RPM
51.5 14.4 745 128 8250

Expect very strong performance with very short takeoff rolls and a great balance of thrust and top speed. Average duration is approximately 12 to 20 minutes depending on throttle management.


Option 2:
Motor: Power 46
ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft Li-Po cutoff and no brake)
Prop: APC 13x8E
Battery: Thunder Power PRO LITE 4200mAh 4S2P (THP42002S2PPL x2 in series)
Flying Weight w/Battery: 5.4 lb

Amps Volts Watts Input Watts/Pound RPM
47.4 14.1 670 124 8220

Expect strong performance with very short takeoff rolls and a great balance of thrust and top speed. Average duration is approximately 8 to 15 minutes depending on throttle management.


Option 3:
Motor: Power 46
ESC: Castle Creations Phoenix 60 (Standard settings with 12V Soft cutoff and no brake)
Prop: APC 13x8E
Battery: Sanyo RC-3000HV 14-Cells (7-Cell packs x2 in series)
Flying Weight w/Battery: 6.7 lb

Amps Volts Watts Input Watts/Pound RPM
44.0 13.4 590 89 7950

Expect good performance with a good balance of thrust and top speed. Average duration is approximately 5 to 7 minutes depending on throttle management.

Technical Notes

Maximum operating temperature: 220 degrees Fahrenheit.

Adequate cooling is required for all motor operation at maximum current levels.

Maximum burst current duration is 15 seconds.  Adequate time between maximum burst intervals is required.